ADPL62935
推荐新设计使用Low-Voltage μP Supervisor with Manual Reset
- 产品模型
- 2
产品详情
- Monitors +1.8V, +2.5V, +3.0V, +3.3V, +5.0V Supplies
- 140ms (min) Reset Timeout Delay
- Manual Reset Input
- Two Reset Output Options
- Push-Pull RESET
- Push-Pull RESET
- Guaranteed Reset Valid to VCC = +1.0V
- Immune to Short Negative VCC Transients
- No External Components
- Small 5-Pin SOT23 Packages
The ADPL62935 is a low-voltage microprocessor (μP) supervisory circuit that combines voltage monitoring and manual reset input functions in a 5-pin SOT23 package. Microprocessor supervisory circuits significantly improve the system’s reliability and accuracy compared to separate ICs or discrete components. These devices assert a reset signal whenever the monitored voltage drops below its preset threshold, keeping it asserted for a minimum timeout period after VCC rises above the threshold. In addition, a debounced manual reset is also available. The ADPL62935 monitors voltages from +1.8V to +5.0V. These outputs are guaranteed to be in the correct state for VCC down to +1.0V.
Nine preprogrammed reset threshold voltages are available (see the Threshold Suffix Guide). The ADPL62935 has a manual reset input and both push-pull RESET and push-pull RESET.
APPLICATIONS
- Set-Top Boxes
- Computers and Controllers
- Embedded Controllers
- Intelligent Instruments
- Critical μP Monitoring
- Portable/Battery-Powered Equipment
参考资料
ADI 始终高度重视提供符合最高质量和可靠性水平的产品。我们通过将质量和可靠性检查纳入产品和工艺设计的各个范围以及制造过程来实现这一目标。出货产品的“零缺陷”始终是我们的目标。查看我们的质量和可靠性计划和认证以了解更多信息。
| 产品型号 | 引脚/封装图-中文版 | 文档 | CAD 符号，脚注和 3D模型 |
|---|---|---|---|
| ADPL62935SUK+ | 5-SOT_23-N/A | ||
| ADPL62935SUK+T | 5-SOT_23-N/A |
这是最新版本的数据手册
最新评论
需要发起讨论吗？ 没有关于 adpl62935的相关讨论？是否需要发起讨论？
在EngineerZone®上发起讨论