AD3306
AD3306
推荐新设计使用Robust, Automotive, Low Power 10BASE-T1S MAC-PHY
- 产品模型
- 2
Viewing:
产品详情
- 10BASE-T1S PHY operating modes
- Point-to-point half-duplex (≥ 15 m)
- Multidrop configuration half-duplex (≥ 25 m, ≥ 8 nodes)
- PLCA features: PLCA coordinator (head node), burst mode, precedence mode, and multiple PLCA IDs
- MAC Features
- OPEN Alliance 10BASE-T1x MAC-PHY serial interface with cut through or store and forward operation
- Transmit priority queues
- 16 MAC address filters
- IEEE 802.1AS / IEEE 1588 support for microcontrollers without TSN support using the gPTP for sensor timestamping and actuator synchronization
- OPEN Alliance features sleep/wake-up, topology discovery, and advanced diagnostics
- Enable output pin (EN) to power down the regulated supply inputs in sleep mode
- Support for local (WAKE input pin) and network (wake-up pulse) wake
- Suitable for 12 V, 24 V, 48 V automotive electrical systems or operating from 5 V levels only
- Detection capability for over voltage and under voltage events when monitoring the VBAT pin
- SSC for handling fault conditions
- Low-current 3.3 V LDO using the LVDD pin as an output
- Compatible with power delivery over data cable
- Provides robust EMC/EMI performance
- Low cost bus interface network with no external ESD components required
- Enhanced noise immunity providing additional performance for noisy environments
- Low power consumption: maximum current of 50 mA in functional modes of operation and 40 μA in sleep mode
- 1.8 V to 3.3 V I/O logic levels with support for 5 V inputs
- −40°C to +150°C junction temperature range
- Small package: 4 mm x 4 mm 24-lead LFCSP (QFN) package
- AEC-Q100 qualified for automotive applications
APPLICATIONS
- Automotive internal and external lighting
- Automotive body and chassis domain control
- Automotive sensor and actuator networking
- Automotive Ethernet based zonal architectures
- Automotive in-vehicle networking
参考资料
数据手册 1
申请保密协议
完成保密协议(NDA)后可获得完整的文件。
申请保密协议ADI 始终高度重视提供符合最高质量和可靠性水平的产品。我们通过将质量和可靠性检查纳入产品和工艺设计的各个范围以及制造过程来实现这一目标。出货产品的“零缺陷”始终是我们的目标。查看我们的质量和可靠性计划和认证以了解更多信息。
产品型号 | 引脚/封装图-中文版 | 文档 | CAD 符号,脚注和 3D模型 |
---|---|---|---|
AD3306WBCPZ | 24-Lead LFSCP (4mm x 4mm x 0.95mm w/ EP) | ||
AD3306WBCPZ-RL | 24-Lead LFSCP (4mm x 4mm x 0.95mm w/ EP) |
这是最新版本的数据手册
最新评论
需要发起讨论吗? 没有关于 ad3306的相关讨论?是否需要发起讨论?
在EngineerZone®上发起讨论