LTM8024

推荐新设计使用

40V_IN 双路 3.5A 或单路 7A Silent Switcher μModule 稳压器

数据手册 (Rev. A) 产品选型表

产品模型: 2

Viewing:

产品详情

两个完整的降压开关电源
低噪声 Silent Switcher^® 架构
符合 CISPR22 B 级标准
宽输入电压范围：3V 至 40V
宽输出电压范围：0.8V 至 8V

12V_IN、3.3V_OUT、T_A = 80°C 时每通道的连续输出电流为 3.5A
多相并联运行以增加电流
可选的开关频率：200kHz 至 3MHz
紧凑封装 (9mm × 11.25mm × 3.32mm) 表面贴装 BGA

产品模型: 2

参考资料

ADI 始终高度重视提供符合最高质量和可靠性水平的产品。我们通过将质量和可靠性检查纳入产品和工艺设计的各个范围以及制造过程来实现这一目标。出货产品的“零缺陷”始终是我们的目标。查看我们的质量和可靠性计划和认证以了解更多信息。

产品型号	引脚/封装图-中文版	文档	CAD 符号，脚注和 3D模型
LTM8024EY#PBF	88-Lead BGA (11.25mm x 9mm x 3.32mm)	Material Declaration Reliablity Data	Ultra Librarian SamacSys
LTM8024IY#PBF	88-Lead BGA (11.25mm x 9mm x 3.32mm)	Material Declaration Reliablity Data	Ultra Librarian SamacSys

产品型号	产品生命周期	PCN

7月 21, 2021 - 21_0159 Ink Mark to Laser Mark Conversion for µModule
		PCN21_0159_Form Material_Report Delta Qualification Matrix
LTM8024EY#PBF	量产
LTM8024IY#PBF	量产
2月 28, 2020 - 20_0123 Micro-Module, Test Site Transfer from Analog Devices Singapore to Analog Devices Penang, Malaysia
		PCN20_0123_Form Material_Report Test Correlation Report Other Qualification Results Summary
LTM8024EY#PBF	量产
LTM8024IY#PBF	量产

这是最新版本的数据手册

软件资源

找不到您所需的软件或驱动?

申请驱动/软件

工具及仿真模型

LTspice

LTspice中提供以下器件型号：

LTM8024

LTspice^®是一款强大高效的免费仿真软件、原理图采集和波形观测器，为改善模拟电路的仿真提供增强功能和模型。

评估套件

LTM8024演示板 | 40V、双路3A降压型μModule稳压器

立即购买更多内容

产品详情

演示电路1868A是一款采用LTM8024 μModule稳压器的双路降压型DC/DC开关转换器。该演示板可通过7V至40V输入提供5V/3A和3.3V/3A双路输出。Silent Switcher^® 架构较大限度地降低了EMI，同时可在高达3MHz的频率下实现高效率。可通过跳线选择工作模式（突发模式或不连续模式/SYNC）。突发模式运行可提高轻负载时的效率。

LTM8024是一款具有电流模式控制方案的固定频率PWM稳压器。开关频率由连接在RT引脚和大地之间的相应电阻器(R11)进行设置。可以使用RUN引脚（EN1/EN2端子）将LTM8024设置为微功耗关断模式。当每个通道的输出电压超出±7.5%的调节窗口时，该通道的电源正常输出（PG1或PG2端子）将变为低电平。

LTM8024数据手册提供了完整的操作和应用说明。必须将该数据手册与本演示手册配合阅读。

资料

DC1868A - Design Files
2020/6/2

DC1868A -Schematic
2020/6/2

DC1868A - Demo Manual
2019/12/6

Software-Defined Radio

立即购买更多内容

特性和优点

RF/SDR
- ADRV9002 transceiver
- 2 x receiver, 2 x transmitter
- LO frequency range 30 MHz to 6 GHz
- 12 kHz to 40 MHz frequency bandwidth
- Sampling rate 12 kSPS to 61.44 MSPS
External Device Clock Input
External MCS Input
RF Front-end
Processing System
- Zynq UltraScale+ MPSoC XCZU3EG
- DDR4 – 2 GB (x32)
- Boot source
  - SD card 3.0
  - Flash memory 128 MB

User Interfaces
- USB 3.1 Gen 1 – Type C
Ethernet 1000BASE-T RGMII
Display Port v1.2 (2 lanes, 5.4 Gbps)
SATA 3
USB (micro) debug interface
16 GPIOs (3V3 LVCMOS)

Power Sources
- USB Type-C (power only)
- USB Type-C (data)
  - Power Sink 5V/3A
  - Power Source 5V/0.9 A
- 802.3at POE compliant, 25.5 W Type2 (POE+)

产品详情

The AD-JUPITER-EBZ is a versatile software-defined platform based on Analog Devices ADRV9002 and Xilinx Zynq UltraScale+ MPSoC. The ADRV9002 is a new generation RF transceiver that has dual-channel transmitters, dual-channel receivers covering a frequency range of 30 MHz to 6 GHz. This device has a high-quality RF linearity performance and a set of advanced features like fast profiles switching, flexible power vs. performance configuration, fast frequency hopping, multi-chip synchronization, and digital pre-distortion (DPD) for narrow and wide band waveform.

The evaluation platform includes XCZU3EG processing device that has a wide range of interfaces, making the system capable of local processing or streaming to a remote host. It comes integrated in a self-contained ruggedized aluminum case, which gives flexibility in evaluating and prototyping across different environments.

APPLICATIONS