MAX11613

• 12-Bit, 2-/4-Channel, SAR ADC Support (MAX11612)
• 24-Bit, 4-Channel, Programmable Data Rate, Sigma-Delta ADC Support (MAX11040)
• 12-Bit, 4-Channel DAC Support (MAX5135)
• Connects with any Spartan 6 Evaluation Boards Through a Standard FMC VITA-57.1 LPC Connector

The MAXSPCSPARTAN6+ evaluation kit (EV kit) is designed to facilitate the use of Maxim ADCs and DACs with any evaluation board made for Xilinx® Spartan® 6 series FPGAs. The EV kit contains the MAX11612 and MAX11040 ADCs and two cascaded MAX5135 DACs. The MAX11612 is a very-low-power, 4-channel, 2-wire, 12-bit, SAR ADC. This ADC operates with a 5V supply and has an internal reference of 4.096V.

The MAX11040 is an SPI™-compatible, 4-channel, simultaneous-sampling, cascadable, 24-bit, sigma-delta ADC. The MAX5135 is the industry's smallest, 12-bit, voltage-output DAC.

Applications

• Automatic Test Equipment
• Automatic Tuning
• Battery-Powered Test Equipment
• Communication Systems
• Data Acquisition
• Gain and Offset Adjustment
• Handheld Portable Applications
• Industrial Data Acquisition Systems
• Medical Instruments
• Multiphase Power Systems
• Portable Instrumentation
• Power Protection Relay Equipment
• Power-Amplifier Control
• Process Control and Servo Loops
• Programmable Voltage and Current Sources
• Received-Signal-Strength Indicators
• Solar-Powered Remote Systems
• System Supervision

• 4/8/12 ADC Channel Inputs
• 1.7MHz I²C Interface
• EV Kit Daughter Board Powered by the Master Board
• Windows 2000-, Windows XP-, and Windows Vista (32-Bit)-Compatible Software
• Time Domain, Frequency Domain, and Histogram Plotting in the EV System Software
• Frequency, RMS, Min, Max, and Average DC Calculations in the EV System Software
• Collects Up to 1 Mega Samples
• On-Board Voltage Reference
• USB-PC Connection
• Proven PCB Layout
• Fully Assembled and Tested

The MAX11600–MAX11617 evaluation system (EV system) includes one master board and one of six EV kit daughter boards. The EV system also includes Windows® 2000-, Windows XP®-, and Windows Vista®-compatible software that provides a simple graphical user interface (GUI) for exercising the features of the MAX11600–MAX11617. The MAX116XXI2CMB+ master board connects to a PC USB port and allows the transfer of I²C commands to the corresponding EV kit daughter board.

The EV kit daughter boards are fully assembled and tested PCBs that demonstrate the capabilities of the MAX11600–MAX11617 4-/8-/12-channel, 8-/10-/12-bit, 3V/5V, low-power, high-speed I²C ADCs with internal reference.

Each EV kit daughter board evaluates three different ADCs, but only the ADC referenced in the EV kit daughter board part name is installed on the board. Contact the factory for free samples of the other pin-compatible ADCs to evaluate these devices or to order individual boards.

Applications

• Battery-Powered Test Equipment
• Handheld Portable Applications
• Medical Instruments
• Solar-Powered Remote Systems
• System Supervision

• 4/8/12 ADC Channel Inputs
• 1.7MHz I²C Interface
• EV Kit Daughter Board Powered by the Master Board
• Windows 2000-, Windows XP-, and Windows Vista (32-Bit)-Compatible Software
• Time Domain, Frequency Domain, and Histogram Plotting in the EV System Software
• Frequency, RMS, Min, Max, and Average DC Calculations in the EV System Software
• Collects Up to 1 Mega Samples
• On-Board Voltage Reference
• USB-PC Connection
• Proven PCB Layout
• Fully Assembled and Tested

The MAX11600–MAX11617 evaluation system (EV system) includes one master board and one of six EV kit daughter boards. The EV system also includes Windows® 2000-, Windows XP®-, and Windows Vista®-compatible software that provides a simple graphical user interface (GUI) for exercising the features of the MAX11600–MAX11617. The MAX116XXI2CMB+ master board connects to a PC USB port and allows the transfer of I²C commands to the corresponding EV kit daughter board.

The EV kit daughter boards are fully assembled and tested PCBs that demonstrate the capabilities of the MAX11600–MAX11617 4-/8-/12-channel, 8-/10-/12-bit, 3V/5V, low-power, high-speed I²C ADCs with internal reference.

Each EV kit daughter board evaluates three different ADCs, but only the ADC referenced in the EV kit daughter board part name is installed on the board. Contact the factory for free samples of the other pin-compatible ADCs to evaluate these devices or to order individual boards.

Applications

• Battery-Powered Test Equipment
• Handheld Portable Applications
• Medical Instruments
• Solar-Powered Remote Systems
• System Supervision

• Ultra-Low Power MAX32660 Arm Cortex M4F
• MAX11615 Low Power 8-Channel 12-Bit ADC
• MAX40007 Nanopower Op-Amp
• MAX9119 Nanopower Comparator
• MAX9634 Current Sense Amplifier
• MAX17222 Boost Convertor
• PCB mounted Coin Cell Power Source

The MAXNANOPWRBD evaluation kit brings together Maxim’s Nanopower technology with the ultra-low power, low pin count, MAX32660 Arm^® Cortex^®-M4 processor with FPU to create a simple digital multimeter application example running on a single 1.5V alkaline button cell.

The kit includes the following items:

• MAXNANOPWRBD# circuit board
• MAX326325PICO JTAG debugger/programmer

Applications

• Fitness Monitors
• Industrial Sensors
• IoT
• Optical Modules: QSFP-DD, QSFP, 400G
• Portable Medical Devices
• Sports Watches
• Wearable Medical Patches

• 4/8/12 ADC Channel Inputs
• 1.7MHz I²C Interface
• EV Kit Daughter Board Powered by the Master Board
• Windows 2000-, Windows XP-, and Windows Vista (32-Bit)-Compatible Software
• Time Domain, Frequency Domain, and Histogram Plotting in the EV System Software
• Frequency, RMS, Min, Max, and Average DC Calculations in the EV System Software
• Collects Up to 1 Mega Samples
• On-Board Voltage Reference
• USB-PC Connection
• Proven PCB Layout
• Fully Assembled and Tested

The MAX11600–MAX11617 evaluation system (EV system) includes one master board and one of six EV kit daughter boards. The EV system also includes Windows® 2000-, Windows XP®-, and Windows Vista®-compatible software that provides a simple graphical user interface (GUI) for exercising the features of the MAX11600–MAX11617. The MAX116XXI2CMB+ master board connects to a PC USB port and allows the transfer of I²C commands to the corresponding EV kit daughter board.

The EV kit daughter boards are fully assembled and tested PCBs that demonstrate the capabilities of the MAX11600–MAX11617 4-/8-/12-channel, 8-/10-/12-bit, 3V/5V, low-power, high-speed I²C ADCs with internal reference.

Each EV kit daughter board evaluates three different ADCs, but only the ADC referenced in the EV kit daughter board part name is installed on the board. Contact the factory for free samples of the other pin-compatible ADCs to evaluate these devices or to order individual boards.

Applications

• Battery-Powered Test Equipment
• Handheld Portable Applications
• Medical Instruments
• Solar-Powered Remote Systems
• System Supervision

• 4/8/12 ADC Channel Inputs
• 1.7MHz I²C Interface
• EV Kit Daughter Board Powered by the Master Board
• Windows 2000-, Windows XP-, and Windows Vista (32-Bit)-Compatible Software
• Time Domain, Frequency Domain, and Histogram Plotting in the EV System Software
• Frequency, RMS, Min, Max, and Average DC Calculations in the EV System Software
• Collects Up to 1 Mega Samples
• On-Board Voltage Reference
• USB-PC Connection
• Proven PCB Layout
• Fully Assembled and Tested

The MAX11600–MAX11617 evaluation system (EV system) includes one master board and one of six EV kit daughter boards. The EV system also includes Windows® 2000-, Windows XP®-, and Windows Vista®-compatible software that provides a simple graphical user interface (GUI) for exercising the features of the MAX11600–MAX11617. The MAX116XXI2CMB+ master board connects to a PC USB port and allows the transfer of I²C commands to the corresponding EV kit daughter board.

The EV kit daughter boards are fully assembled and tested PCBs that demonstrate the capabilities of the MAX11600–MAX11617 4-/8-/12-channel, 8-/10-/12-bit, 3V/5V, low-power, high-speed I²C ADCs with internal reference.

Each EV kit daughter board evaluates three different ADCs, but only the ADC referenced in the EV kit daughter board part name is installed on the board. Contact the factory for free samples of the other pin-compatible ADCs to evaluate these devices or to order individual boards.

Applications

• Battery-Powered Test Equipment
• Handheld Portable Applications
• Medical Instruments
• Solar-Powered Remote Systems
• System Supervision

• 4/8/12 ADC Channel Inputs
• 1.7MHz I²C Interface
• EV Kit Daughter Board Powered by the Master Board
• Windows 2000-, Windows XP-, and Windows Vista (32-Bit)-Compatible Software
• Time Domain, Frequency Domain, and Histogram Plotting in the EV System Software
• Frequency, RMS, Min, Max, and Average DC Calculations in the EV System Software
• Collects Up to 1 Mega Samples
• On-Board Voltage Reference
• USB-PC Connection
• Proven PCB Layout
• Fully Assembled and Tested

The MAX11600–MAX11617 evaluation system (EV system) includes one master board and one of six EV kit daughter boards. The EV system also includes Windows® 2000-, Windows XP®-, and Windows Vista®-compatible software that provides a simple graphical user interface (GUI) for exercising the features of the MAX11600–MAX11617. The MAX116XXI2CMB+ master board connects to a PC USB port and allows the transfer of I²C commands to the corresponding EV kit daughter board.

The EV kit daughter boards are fully assembled and tested PCBs that demonstrate the capabilities of the MAX11600–MAX11617 4-/8-/12-channel, 8-/10-/12-bit, 3V/5V, low-power, high-speed I²C ADCs with internal reference.

Each EV kit daughter board evaluates three different ADCs, but only the ADC referenced in the EV kit daughter board part name is installed on the board. Contact the factory for free samples of the other pin-compatible ADCs to evaluate these devices or to order individual boards.

Applications

• Battery-Powered Test Equipment
• Handheld Portable Applications
• Medical Instruments
• Solar-Powered Remote Systems
• System Supervision

• 4/8/12 ADC Channel Inputs
• 1.7MHz I²C Interface
• EV Kit Daughter Board Powered by the Master Board
• Windows 2000-, Windows XP-, and Windows Vista (32-Bit)-Compatible Software
• Time Domain, Frequency Domain, and Histogram Plotting in the EV System Software
• Frequency, RMS, Min, Max, and Average DC Calculations in the EV System Software
• Collects Up to 1 Mega Samples
• On-Board Voltage Reference
• USB-PC Connection
• Proven PCB Layout
• Fully Assembled and Tested

The MAX11600–MAX11617 evaluation system (EV system) includes one master board and one of six EV kit daughter boards. The EV system also includes Windows® 2000-, Windows XP®-, and Windows Vista®-compatible software that provides a simple graphical user interface (GUI) for exercising the features of the MAX11600–MAX11617. The MAX116XXI2CMB+ master board connects to a PC USB port and allows the transfer of I²C commands to the corresponding EV kit daughter board.

The EV kit daughter boards are fully assembled and tested PCBs that demonstrate the capabilities of the MAX11600–MAX11617 4-/8-/12-channel, 8-/10-/12-bit, 3V/5V, low-power, high-speed I²C ADCs with internal reference.

Each EV kit daughter board evaluates three different ADCs, but only the ADC referenced in the EV kit daughter board part name is installed on the board. Contact the factory for free samples of the other pin-compatible ADCs to evaluate these devices or to order individual boards.

Applications

• Battery-Powered Test Equipment
• Handheld Portable Applications
• Medical Instruments
• Solar-Powered Remote Systems
• System Supervision