EVAL-ADL5531
ADL5531 Evaluation Board
トップへ
製品概要
製品概要
ADL5531-EVALZ is a 4-layer, FR4-based evaluation board. For normal operation it requires a single 5 V/100 mA power supply. The 5 V power supply should be connected to the test loops labeled VPOS and GND. Alternatively, the power supply connections may be made via the two pin header, W-1. The RF input is applied to the SMA connector labeled RFIN. The RF output is available at the SMA connector labeled RFOUT.
関連資料
-
ADL5531: 20 MHz to 500 MHz IF Gain Block Data Sheet (Rev. C)2007/11/08PDF498 K
-
ADL5531 Gerber Files2011/09/13ZIP894 kB