MAX8601

PRODUCTION

Single-/Dual-Input 1-Cell Li+ Chargers with OVP Protection and Programmable Charge Timer

Single-Cell Li+ Chargers with Thermal Regulation, OVP, and Programmable Charge Timer Eliminate the Need for Wall-Cube Chargers with Portable Equipment

Data Sheet (Rev. 3) Product Selection Table
Part Models
2
1ku List Price
Starting From $2.04
Viewing:

Part Details

  • Single- (MAX8600) or Dual- (MAX8601) Input Li+ Charger
  • Up to 1A Programmable Fast-Charge
  • 100mA/500mA USB Select Input (MAX8601)
  • ±5% Fast-Charge Current-Limit Accuracy
  • 14V Input Overvoltage Protection
  • Programmable On-Chip Charge Timers
  • Battery Thermistor Input
  • Charger-Status Outputs
  • Thermally Optimized Charge Rate
  • 14-Pin, 3mm x 3mm TDFN Package
MAX8601
Single-/Dual-Input 1-Cell Li+ Chargers with OVP Protection and Programmable Charge Timer
MAX8600, MAX8601: Typical Operating Circuit
Add to myAnalog

Add product to the Products section of myAnalog (to receive notifications), to an existing project or to a new project.

Create New Project
Ask a Question

Documentation

Data Sheet 1

Reliability Data 1

Technical Articles 1

Learn More
Add to myAnalog

Add product to the Products section of myAnalog (to receive notifications), to an existing project or to a new project.

Create New Project

Hardware Ecosystem

Parts Product Life Cycle Description
Linear Battery Chargers 1
MAX1874
PRODUCTION Dual-Input, USB/AC Adapter, 1-Cell Li+ Charger with OVP and Thermal Regulation
Modal heading
Add to myAnalog

Add product to the Products section of myAnalog (to receive notifications), to an existing project or to a new project.

Create New Project

Evaluation Kits

MAX8601EVKIT

Evaluation Kit for the MAX8601

Buy Now View Details

Features and Benefits

  • Dual-Input Li+ Charger
  • Up to 1A Programmable Fast Charge (from DC)
  • 100mA/500mA USB Select Input
  • 4.15V to 7V Operating Voltage Range
  • 14V Input Overvoltage Protection for USB and DC
  • Programmable On-Chip Charge Timers
  • Battery Thermistor Input
  • Charger Status Outputs
  • Logic-Low Enable Input
  • Thermally Optimized Charge Rate
  • Male Type-B USB Jack
  • 14-Pin (3mm x 3mm) TDFN Package
  • Fully Assembled and Tested

    • Product Details

    The MAX8601 evaluation kit (EV kit) is a fully assembled and tested surface-mount PC board demonstrating the MAX8601 single-cell, linear Li+ battery charger. The EV kit operates from either a 100mA/500mA USB port or a 4.15V to 14V input power supply; however, charging is disabled when the input voltage exceeds 7V. Charging is optimized for Li+ cells using a control algorithm that includes low-battery precharging, voltage, and current-limited fast charging, and top-off charging, while continuously monitoring the battery for overvoltage, over/under-temperature, and charging time.

    The charger timeout protection is programmable. The charger status is indicated by three open-drain outputs. The MAX8601 automatically selects between either a USB or an AC-adapter input source. The AC-adapter charge current is programmable, while the USB charge current is preset not to exceed either 100mA or 500mA, depending on the USEL input. The MAX8601 EV kit also evaluates the MAX8600 with no PC board modification. The MAX8601 is assembled in the space-saving 3mm x 3mm, 14-pin TDFN package.

    Applications

    • Cell Phones
    • Digital Cameras
    • MP3 Players
    • PDAs Wireless Appliances
    • Portable Media Players
    MAX8601EVKIT
    Evaluation Kit for the MAX8601

    Latest Discussions

    No discussions on max8601 yet. Have something to say?

    Start a Discussion on EngineerZone®

    Recently Viewed