LTC3775

PRODUCTION

High Frequency Synchronous Step-Down Voltage Mode DC/DC Controller

Part Models
8
1ku List Price
Starting From $2.18
Viewing:

Part Details

  • Wide VIN Range: 4.5V to 38V
  • Line Feedforward Compensation
  • Low Minimum On-Time: tON(MIN) < 30ns
  • Powerful On-board MOSFET Drivers
  • Leading Edge Modulation Voltage Mode Control
  • ±0.75%, 0.6V Reference Voltage Accuracy Over Temperature
  • VOUT Range: 0.6V to 0.8VIN
  • Programmable, Cycle-by-Cycle Peak Current Limit
  • Sense Resistor or RDS(ON) Current Sensing
  • Programmable Soft-Start
  • Synchronizable Fixed Frequency from 250kHz to 1MHz
  • Selectable Pulse-Skipping or Forced Continuous Modes of Operation
  • Low Shutdown Current: 14μA Typical
  • Thermally Enhanced 16-Lead MSOP and 3mm × 3mm QFN Packages
LTC3775
High Frequency Synchronous Step-Down Voltage Mode DC/DC Controller
Efficiency and Power Loss vs Load Current Product Package 1 Product Package 2
Add to myAnalog

Add product to the Products section of myAnalog (to receive notifications), to an existing project or to a new project.

Create New Project
Ask a Question

Documentation

Data Sheet

This is the most up-to-date revision of the Data Sheet.

Learn More
Add to myAnalog

Add product to the Products section of myAnalog (to receive notifications), to an existing project or to a new project.

Create New Project

Hardware Ecosystem

Parts Product Life Cycle Description
Digital Power System Managers 1
LTC2974 RECOMMENDED FOR NEW DESIGNS 4-Channel PMBus Power System Manager Featuring Accurate Output Current Measurement
Dual-Supply Monitors 1
LTC2960 RECOMMENDED FOR NEW DESIGNS 36V Nano-Current Two-Input Voltage Monitor
Multiple Output Buck Regulators 1
LTC3880 RECOMMENDED FOR NEW DESIGNS Dual Output PolyPhase Step-Down DC/DC Controller with Digital Power System Management
Surge Stopper, Overvoltage, and Overcurrent Protection 1
LT4363 RECOMMENDED FOR NEW DESIGNS High Voltage Surge Stopper with Current Limit
Modal heading
Add to myAnalog

Add product to the Products section of myAnalog (to receive notifications), to an existing project or to a new project.

Create New Project

Tools & Simulations

LTspice 2


Models for the following parts are available in LTspice:

  • LTC3775
LTspice

LTspice® is a powerful, fast and free simulation software, schematic capture and waveform viewer with enhancements and models for improving the simulation of analog circuits.


Evaluation Kits

eval board
DC1290A-A

LTC3775EUD Demo Board | 5V ≤ VIN ≤ 26V, VOUT = 1.2V @ 15A

Product Details

Demonstration circuit 1290A is a high frequency synchronous step-down converter featuring the LTC3775EUD. The package style for the LTC3775EUD is a 16-pin 3mm x 3mm QFN. Two versions of the demonstration board are available. DC-1290A-A has been optimized for 5V to 26V input and typically provides 1.2V/15A, while the DC1290A-B is optimized for 5V to 36VIN range and typically provides 1.2V/10A.


 


eval board
DC1290A-B

LTC3775EUD Demo Board | 5V ≤ VIN ≤ 36V, VOUT = 1.2V @ 10A

Product Details

Demonstration circuit 1290A is a high frequency synchronous step-down converter featuring the LTC3775EUD. The package style for the LTC3775EUD is a 16-pin 3mm x 3mm QFN. Two versions of the demonstration board are available. DC-1290A-A has been optimized for 5V to 26V input and typically provides 1.2V/15A, while the DC1290A-B is optimized for 5V to 36VIN range and typically provides 1.2V/10A.


 


DC1290A-A
LTC3775EUD Demo Board | 5V ≤ VIN ≤ 26V, VOUT = 1.2V @ 15A
DC1290A-A - Schematic
DC1290A-B
LTC3775EUD Demo Board | 5V ≤ VIN ≤ 36V, VOUT = 1.2V @ 10A
DC1290A-A - Schematic

Latest Discussions

Recently Viewed