HMC900
NOT RECOMMENDED FOR NEW DESIGNS50 MHz Dual Baseband Programmable Low Pass Filter
- Part Models
- 1
- 1ku List Price
- price unavailable
Part Details
- Low Noise Figure: 12 dB
- High linearity: Output IP3 +30 dBm
- Programmable Bandwidth:
3.5 to 50 MHz - Exceptional 3 dB
Bandwidth Accuracy: ±2.5% - 6th order Butterworth
Magnitude & Phase Response - Automatic Filter Calibration
- Externally Controlled Common Mode
Output Level Simplifies Interface - Read/Write Serial Port Interface (SPI)
- 32 Lead 5x5 mm SMT Package: 25 mm²
The HMC900LP5E is a 6th order, programmable bandwidth, fully calibrated, dual low pass filter. It features 0 or 10 dB input gain setting and supports arbitrary bandwidths from 3.5 to 50 MHz, and when calibrated, is accurate to ±2.5% of the desired bandwidth. It includes a filter bypass option with a bandwidth of 100 MHz, while retaining gain and common mode settings.
Housed in a compact 5x5mm SMT QFN package, the HMC900LP5E requires minimal external components and provides a low cost alternative to more complicated switched discrete filter architectures. Filter calibration for the HMC900LP5E is accomplished with any reference clock rate from 20 to 80 MHz. One time programmable (OTP) memory offers unsurpassed flexibility allowing the user "set and forget" parameters like gain, and bandwidth setting.
Matched filter paths provide excellent quadrature balance, making the HMC900LP5E ideal for I/Q communications applications. The 6th order Butterworth transfer function delivers superior stop band rejection while maintaining both a flat passband and minimal group delay variation.
Applications
- Baseband Filtering for A/D or D/A Converters
- Point-to-Point, Fixed Wireless & Cellular Base Station Transceivers
- Integrated Direct Conversion Receiver (DCR)
- Software Defined Radio Applications
- Test & Measurement Equipment
Documentation
Data Sheet 1
Product Selection Guide 1
Quality Documentation 4
Tape & Reel Specification 1
ADI has always placed the highest emphasis on delivering products that meet the maximum levels of quality and reliability. We achieve this by incorporating quality and reliability checks in every scope of product and process design, and in the manufacturing process as well. "Zero defects" for shipped products is always our goal. View our quality and reliability program and certifications for more information.
| Part Model | Pin/Package Drawing | Documentation | CAD Symbols, Footprints, and 3D Models |
|---|---|---|---|
| HMC900LP5ETR | 32-Lead QFN (5mm x 5mm w/ EP) |
| Part Models | Product Lifecycle | PCN |
|---|---|---|
|
Jul 28, 2022 - 22_0023 Product Discontinuance for Select Analog Devices Parts (ADFXXXX, HMCXXX) |
||
| HMC900LP5ETR | LAST TIME BUY | |
This is the most up-to-date revision of the Data Sheet.
Software Resources
Evaluation Software 1
Can't find the software or driver you need?
Tools & Simulations
ADIsimRF
ADIsimRF is an easy-to-use RF signal chain calculator. Cascaded gain, noise, distortion and power consumption can be calculated, plotted and exported for signal chains with up to 50 stages. ADIsimRF also includes an extensive data base of device models for ADI’s RF and mixed signal components.
Open Tool