DS80C390
PRODUCTIONDual CAN High-Speed Microprocessor
- Part Models
- 4
- 1ku List Price
- Starting From $20.88
Part Details
- 80C52 Compatible
- High-Speed Architecture
- 4kB Internal SRAM Usable as Program/Data/Stack Memory
- Enhanced Memory Architecture
- Two Full-Function CAN 2.0B Controllers
- Two Full-Duplex Hardware Serial Ports
- Programmable IrDA Clock
- High Integration Controller
- 16 Interrupt Sources with Six External
- Available in 64-Pin LQFP, 68-Pin PLCC
The DS80C390 is a fast 8051-compatible microprocessor with dual CAN 2.0B controllers. The redesigned processor core executes 8051 instructions up to 3X faster than the original for the same crystal speed. The DS80C390 supports a maximum crystal speed of 40MHz, resulting in apparent execution speeds of 100MHz (approximately 2.5X). An optional internal frequency multiplier allows the microprocessor to operate at full speed with a reduced crystal frequency, reducing EMI. A hardware math accelerator further increases the speed of 32-bit and 16-bit multiply and divide operations as well as high-speed shift, normalization, and accumulate functions.
The High-Speed Microcontroller User's Guide and the High-Speed Microcontroller User's Guide: DS80C390 Supplement should be used in conjunction with this data sheet. Download both at www.maximintegrated.com/microcontrollers.
- Agricultural Equipment
- Factory Automation
- Gaming Equipment
- Heating, Ventilation, and Air Conditioning
- Industrial Controls
- Medical Equipment
Documentation
Data Sheet 1
Reliability Data 1
User Guide 2
Application Note 7
Design Note 3
Technical Articles 7
ADI has always placed the highest emphasis on delivering products that meet the maximum levels of quality and reliability. We achieve this by incorporating quality and reliability checks in every scope of product and process design, and in the manufacturing process as well. "Zero defects" for shipped products is always our goal. View our quality and reliability program and certifications for more information.
| Part Model | Pin/Package Drawing | Documentation | CAD Symbols, Footprints, and 3D Models |
|---|---|---|---|
| DS80C390-FCR+ | 64-LQFP-10X10X1.4 | ||
| DS80C390-FNR+ | 64-LQFP-10X10X1.4 | ||
| DS80C390-QCR+ | Plastic Leaded Chip Carrier | ||
| DS80C390-QNR+ | Plastic Leaded Chip Carrier |
This is the most up-to-date revision of the Data Sheet.
Software Resources
Can't find the software or driver you need?
Request a Driver/SoftwareLatest Discussions
No discussions on DS80C390 yet. Have something to say?
Start a Discussion on EngineerZone®