##Settings##
:Version 1.1 October 25th 2007 LFCSP:
End

##CVBS AUTODETECT##
:Autodetect CVBS In, YPrPb Out:
42 00 00 ; INSEL = CVBS in on AIn 1
42 04 57 ; Enable SFL
42 17 41 ; select SH1
42 31 02 ; Clears NEWAV_MODE, SAV/EAV  to suit ADV video encoders
42 3D A2 ; MWE Enable Manual Window, Colour Kill Threshold to 2
42 3E 6A ; BLM optimisation
42 3F A0 ; BGB
42 0E 80 ; ADI Recommended Write
42 55 81 ; ADI Recommended Write
42 0E 00 ; ADI Recommended Write
56 00 1C ; Power up DACs and PLL
56 01 00 ; SD only mode
56 80 10 ; SSAF Luma filter enabled, NTSC mode
56 82 C9 ; Step control on, pixel data valid, pedestal on, PrPb SSAF on, YPrPb out.
56 87 20 ; PAL/NTSC autodetect mode enabled
56 88 00 ; 8 bit input enabled
End

##YC AUTODETECT##
:YC In, YPrPb Out:
42 00 06 ; Insel=YC, y=Ain1, C=Ain2
42 04 57 ; Enable SFL
42 31 02 ; Clears NEWAV_MODE, SAV/EAV  to suit ADV video encoders
42 3D A2 ; MWE Enable Manual Window, Colour Kill Threshold to 2
42 3E 6A ; BLM optimisation
42 3F A0 ; BGB
42 58 04 ; YC@2xOS
42 0E 80 ; ADI Recommended Write
42 55 81 ; ADI Recommended Write
42 0E 00 ; ADI Recommended Write
56 00 1C ; Power up DACs and PLL
56 01 00 ; SD only mode
56 80 10 ; SSAF Luma filter enabled, NTSC mode
56 82 C9 ; Step control on, pixel data valid, pedestal on, PrPb SSAF on, YPrPb out.
56 87 20 ; PAL/NTSC autodetect mode enabled
56 88 00 ; 8 bit input enabled
End

##YPrPb AUTODETECT##
:YPrPb In, YPrPb Out:
42 00 09 ; INSEL = YPrPb, Y=Ain1, Pr=Ain2, Pb=Ain3
42 31 02 ; Clears NEWAV_MODE, SAV/EAV  to suit ADV video encoders
42 3D A2 ; MWE Enable Manual Window
42 3E 6A ; BLM optimisation
42 3F A0 ; ADI Recommended Write
42 0E 80 ; ADI Recommended Write
42 55 81 ; ADI Recommended Write
42 0E 00 ; ADI Recommended Write
56 00 1C ; Power up DACs and PLL
56 01 00 ; SD only mode
56 80 10 ; SSAF Luma filter enabled, NTSC mode
56 82 C9 ; Step control on, pixel data valid, pedestal on, PrPb SSAF on, YPrPb out.
56 87 20 ; PAL/NTSC autodetect mode enabled
56 88 00 ; 8 bit input enabled
End