Search

You searched for “pc”
Filters
Filters
Site Section
- 104
- 1
Results on Analog.com
Relevance
Sort by
- Product_categories.lvl0:Amplifiers
- Application NoteIn today’s industry, the layout of the system board has become an integral part of the design itself.
- Evaluation Board & Kit… attached to a heat sink using an electrically and thermally conductive epoxy providing a low thermal and low dc resistance path. Components are mounted using SN63 solder allowing rework of the surface-mount components without compromising the circuit board to heat sink attachment. The evaluation board and populated components are designed to operate over the ambient temperature range of −40°C to +85°C. During operation, attach the evaluation board to a temperature controlled plate to control …
- Evaluation Board & Kit… its LT8550 which is configured as a master DC2331A-B does not have a primary controller, and its LT8550 is configured as a slave with four power sections The DC2331A-A and DC2331A-B use the same PCB and the PCB is an example of how ground plane layers should be configured and traces routed for reliable performance. The input voltage range of DC2331A-A/DC2331A-B is from 14V to 56V and the output …
- Evaluation Board & KitThis user guide explains how to use the EVAL-AD5753SDZ to evaluate the AD5753, a single-channel, 16-bit voltage and current output, digital-to-analog converter (DAC) with on-chip positive and negative dynamic power control (DPC) that minimizes package power dissipation. The EVAL-SDP-CS1Z system demonstration platform (SDP-S) board is required when using the EVAL-AD5753SDZ board. The EVAL-AD5753SDZ (see Figure 1) interfaces to the USB port of the PC …
- Evaluation Board & KitUse RF circuit design techniques for the circuit board used in the application. Provide 50 Ω impedance for the signal lines and directly connect the package ground leads and exposed paddle to the ground plane. Use a sufficient number of via holes to connect the top and bottom ground planes. The evaluation PCB is available from Analog Devices, Inc., upon request.
- Evaluation Board & KitThe EVAL-ADPA9007 consists of a 2-layer printed circuit board (PCB) fabricated from 10 mil thick Rogers 4350B copper clad mounted to an aluminum heat spreader. The heat spreader assists in providing thermal relief to the ADPA9007 and mechanical support to the PCB. The mounting holes on the heat spreader allow for attachment to larger heat sinks to improve thermal management. The RFIN and RFOUT/VDD ports are populated by 2.92 mm female …
- Evaluation Board & KitUse RF circuit design techniques for the circuit board used in the application. Provide 50 Ω impedance for the signal lines and directly connect the package ground leads and exposed paddle to the ground plane. Use a sufficient number of via holes to connect the top and bottom ground planes. The evaluation circuit board is available from Analog Devices, Inc., upon request.
- Evaluation Board & KitThe EV1HMC8415LP6G evaluation board consists of a two layer PCB fabricated from 10 mil thick Rogers 4350B copper clad or equivalent, mounted to an aluminum heat spreader. The heat spreader assists in providing thermal relief to the part as well as mechanical support to the PCB. Mounting holes on the heat spreader allow it to be easily attached to larger heat sinks for improved thermal management. The RFIN and RFOUT ports are populated by 2 …
- Evaluation Board & KitThe EV2HMC998APM5 consists of a 2-layer printed circuit board (PCB) fabricated from 10 mil thick, Rogers 4350B, copper clad, mounted to an aluminum heat spreader. The heat spreader assists in providing thermal relief to the device as well as mechanical support to the PCB. Mounting holes on the heat spreader allow it to be attached to a heat sink for improved thermal management. The RFIN and RFOUT ports are populated with 2.9 mm …
- Design Interface Ltd provides complete electronic product development, encompassing hardware/software design, PCB layout, prototype assembly and test. We have extensive experience with Analog Devices' DSP's in communications, audio, control and encryption using MATLAB simulation tools. Previous projects: satellite voice/data terminals and air interface design, combining inaudible digital information and analog audio over a single channel, and multiprocessor systems for encryption processing.