MAX9150EVKIT
Evaluation Kit for the MAX9150
Top
Overview
Features and Benefits
- Two Independent Repeater Circuits
- Link Testing with LVDS Signals
- Supports Testing of Various Media
- Coax Cable with SMA Connectors
- Twisted-Wire Pair
- PC Board Trace
- Independent Supplies Allow Common-Mode Testing
- Low-Voltage, Low-Power Operation
- Fully Assembled and Tested
Product Details
The MAX9150 evaluation kit (EV kit) is a fully assembled and tested circuit board that simplifies the evaluation of the MAX9150 400Mbps, 10-port low-voltage differential signaling (LVDS) repeater. The MAX9150 accepts an LVDS signal and repeats it on 10 outputs. Output levels are LVDS into a double-terminated bus (100Ω at each end of the differential bus for a total 50Ω load). The EV kit contains two independent circuits, each with a MAX9150 repeater, that can be linked using various media or tested independently. The outputs can be sampled through SMA connectors or category-5 twisted-wire pair. The two circuits on the EV kit require +3.3V power supplies to operate.
Applications
- Add/Drop Multiplexers
- Backplane and Interconnect Applications
- Cell Phone Base Stations
- Clock/Data Distribution
- Digital Cross-Connects
- Network Routers and Switches
Applicable Parts
Documentation & Resources
-
MAX9150EVKIT: Evaluation Kit for the MAX9150 Data Sheet (Rev. 0)5/4/2001PDF326K