MAX5556
Low-Cost Stereo Audio DAC
Part Details
- Simple and Complete Stereo Audio DAC Solutions, No Controls to Set
- Sigma-Delta Stereo DACs with Built-In Interpolation and Analog Output Filters
- I2S-Compatible Digital Audio Interface
- Clickless/Popless Operation
- 3.5VP-P Output Voltage Swing
- -87dB THD+N
- +87dB Dynamic Range
- Sample Frequencies (fS) from 2kHz to 50kHz
- Master Clock (MCLK) up to 25MHz
- Automatic Detection of Clock Ratio (MCLK/LRCLK)
The MAX5556 stereo audio sigma-delta digital-to-analog converter (DAC) offers a simple and complete stereo digital-to-analog solution for media servers, set-top boxes, video-game hardware, and other general consumer audio applications. This DAC features built-in digital interpolation/filtering, sigma-delta digital-to-analog conversion, and analog output filtering. Control logic and mute circuitry minimize audible pops and clicks during power-up, power-down, clock changes, or when invalid clock conditions occur.
The MAX5556 receives input data over a 3-wire I2S-compatible interface with left-justified audio data. Data can be clocked by either an external or internal serial clock. The internal serial clock frequency is programmable by selection of a master clock (MCLK) and sample clock (LRCLK) ratio. Sampling rates from 2kHz to 50kHz are supported.
The MAX5556 operates from a single +4.75V to +5.5V analog supply with total harmonic distortion plus noise below -87dB. This device is available in an 8-pin SO package and is specified over the -40°C to +85°C industrial temperature range.
Applications
- Digital Video Recorders and Media Servers
- Set-Top Boxes
- Video-Game Hardware
Documentation
Data Sheet 1
Reliability Data 1
Technical Articles 1
This is the most up-to-date revision of the Data Sheet.
Latest Discussions
No discussions on max5556 yet. Have something to say?
Start a Discussion on EngineerZone®