MAX5547
Dual, 10-Bit, Current-Sink Output DAC
Part Details
- Dual Current-Sink DACs
- 10-Bit Resolution
- Two Software-Programmable Full-Scale Current Ranges: 3.6mA or 1.2mA
- Parallelable Outputs for Up to 7.2mA (max)
- +2.5V Internal Reference Drifts Only 4ppm/°C
- +2.7V to +5.25V Single-Supply Operation
- INL: ±1 LSB
- DNL: ±0.75 LSB (Guaranteed Monotonic)
- Low +0.8V Output Compliance
- Ultra-Small, 3mm x 3mm x 0.8mm, 8-Pin TDFN Package
The MAX5547 dual, 10-bit, dual range, digital-to-analog converter (DAC) sinks up to 3.6mA of current, making it ideal for laser-driver-control applications. Parallel the MAX5547 outputs to sink higher current (up to 7.2mA max). Operating from a single +2.7V to +5.25V supply, the MAX5547 typically consumes 1mA (internal reference).
The MAX5547 operates from a precision +2.5V internal 4ppm/°C reference or an external reference in the +2.45V to +2.55V range. The maximum full-scale current-sink range is software programmable to 3.6mA or 1.2mA for each DAC. A 10MHz SPI™-compatible serial interface configures the device. The MAX5547 is available in a 3mm x 3mm x 0.8mm 8-pin TDFN package and is specified over the -40°C to +85°C extended temperature range.
Applications
- Average Power
- Extinction Ratios
- Laser-Driver Control
- Modulation Currents
- PIN-Diode Bias Currents
Documentation
This is the most up-to-date revision of the Data Sheet.
Latest Discussions
No discussions on max5547 yet. Have something to say?
Start a Discussion on EngineerZone®