MAX3507
Upstream CATV Amplifier
Part Details
- Built-In 5th-Order Elliptic Anti-Aliasing Filter
- 5MHz to 65MHz Operation
- 55dB Gain Control Range
- Optional Positive Slope Generator
- 55dB Spurious-Free Dynamic Range Over Transmit Band
The MAX3507 is a variable-gain power amplifier for use in CATV upstream transmitters. The variable-gain feature has 55dB of dynamic range and is controlled by a 3-wire SPI™ bus. The device is capable of generating +64dBmV output (16QAM/QPSK) when driven with a +34dBmV nominal input signal. The on-chip anti-alias lowpass filter with 75MHz cutoff frequency saves system design cost and space. The optional positive slope generator provides system design flexibility.
The device operates from a single +5V supply and draws 220mA nominal during transmit at max gain (100% duty cycle). For burst-type transmissions, the device is shut off between bursts to minimize noise and save power while still maintaining a match at the output. The device is optimized for high linearity with harmonic levels below -55dBc.
The MAX3507 is available in a 28-pin QFN package and operates over the extended industrial temperature range (-40°C to +85°C).
Applications
- Cable Modem Upstream Transmitter
- Set-Top Box Upstream Transmitter
- Telephony-Over-Cable
Documentation
Data Sheet 1
Technical Articles 2
This is the most up-to-date revision of the Data Sheet.
Latest Discussions
No discussions on MAX3507 yet. Have something to say?
Start a Discussion on EngineerZone®