Stability 101: Driving a Capacitive Load (Operational Amplifiers)
Analog Devices’ Matt Duff explains why it’s a bad idea to drive a capacitor directly with an operational amplifiers (on amp) and why putting a resistor between the op amp and capacitor can makes the circuit stable.
Current Time 0:00
Duration 0:00
Loaded: 0%
Stream Type LIVE
Remaining Time 0:00
 
1x
  • Chapters
  • descriptions off, selected
  • captions off, selected

    Stability 101: Driving a Capacitive Load (Operational Amplifiers)

    WATCH SERIES
    Sep 12 2012

    Analog Devices’ Matt Duff explains why it’s a bad idea to drive a capacitor directly with an operational amplifiers (on amp) and why putting a resistor between the op amp and capacitor can makes the circuit stable.

    Stability 101: Driving a Capacitive Load (Operational Amplifiers)
    Analog Devices’ Matt Duff explains why it’s a bad idea to drive a capacitor directly with an operational amplifiers (on amp) and why putting a resistor between the op amp and capacitor can makes the circuit stable.
    Current Time 0:00
    Duration 0:00
    Loaded: 0%
    Stream Type LIVE
    Remaining Time 0:00
     
    1x
    • Chapters
    • descriptions off, selected
    • captions off, selected

      Stability 101: Driving a Capacitive Load (Operational Amplifiers)

      WATCH SERIES
      Sep 12 2012
      Analog Devices’ Matt Duff explains why it’s a bad idea to drive a capacitor directly with an operational amplifiers (on amp) and why putting a resistor between the op amp and capacitor can makes the circuit stable.
      modal bookmark icon

      {{modalTitle}}

      modal close icon

      {{modalDescription}}

      {{dropdownTitle}}

      input down arrow
      • {{defaultSelectedText}}
        • {{#each projectNames}}
      • {{name}}
        • {{/each}} {{#if newProjectText}}
      • plus icon {{newProjectText}}
        • {{/if}}
      {{#if toggleButtonDescription}}
      {{toggleButtonDescription}}
      {{/if}} {{#if newProjectTitle}}

      {{newProjectTitle}}

      {{projectNameErrorText}}

      {{/if}}