ADP165

• Input voltage range: 2.2 V to 5.5 V
• Output current range: 0 mA to 150 mA
• Output voltage accuracy: ±1%
• Operating temperature range: −40°C to +125°C

Simple device measurements such as line and load regulation, dropout voltage, and ground current can be demonstrated with only a single voltage supply, a voltmeter, an ammeter, and load resistors. 

Complete specifications for the ADP165/ADP166 linear regulators are available in the ADP165/ADP166 data sheet available from Analog Devices, Inc., and should be consulted in conjunction with this user guide when using the evaluation boards.

• Ultra-low distortion, high-resolution source
  • DC, 50Hz to 40kHz Frequency Range
  • Proprietary digital pre-distortion (DPD) algorithm
  • –130dBc THD @ 1kHz (typ.)
  • Arbitrary waveform generation (AWG) with on-board pattern memory
  • Differential (balanced) output up to 3.5VRMS
  • Fast pattern switching between multiple stored waveforms
• Fully Differential input Acquisition Channel
• Small form-factor (60mm x 40mm)
• Low power, 1W typ. (quiescent)
• SPI interface for integration into test and measurement systems

The ADMX1001 is an ultra-low distortion sinewave and high-resolution arbitrary waveform generator with an acquisition channel. This high-performance module demonstrates a proprietary digital pre-distortion algorithm that reduces signal distortion below levels that can be achieved with high-performance digital-to-analog converters (DAC) and amplifiers alone. Its differential output can be set to common-mode levels often required to test high-performance analog-to-digital converters (ADC), audio codecs, and other audio ICs and systems. The signal generator and the acquisition channel can be individually controlled using separate, easy to use, SPI interfaces - combined with the module's small-form factor, the ADMX1001 can be easily embedded into test systems, or simply used on the bench for measurement and characterization.

APPLICATIONS

• High-end audio test
• Analog-to-digital converter characterization and test
• Sensor and transducer test
• Frequency response and network analysis
• ATE

• Ultra-low distortion, high-resolution source
  • DC, 50Hz to 40kHz Frequency Range
  • Proprietary digital pre-distortion (DPD) algorithm
  • –130dBc THD @ 1kHz (typ.)
  • Arbitrary waveform generation (AWG) with on-board pattern memory
  • Differential (balanced) output up to 3.6VRMS
• Fast pattern switching between multiple stored waveforms
• Small form-factor (60mm x 40mm)
• Low power, 1W typ. (quiescent)
• SPI interface for integration into test and measurement systems

The ADMX1002 is an ultra-low distortion sinewave and high-resolution arbitrary waveform generator. This high-performance module demonstrates a proprietary digital pre-distortion algorithm that reduces signal distortion below levels that can be achieved with high-performance digital-to-analog converters (DAC) and amplifiers alone. Its differential output can be set to common-mode levels often required to test high-performance analog-to-digital converters (ADC), audio codecs, and other audio ICs and systems. With an easy-to-use SPI interface and small-form factor, the ADMX1002 can be easily embedded into test systems, or simply used on the bench for measurement and characterization.

APPLICATIONS

• High-end audio test
• Analog-to-digital converter characterization and test
• Sensor and transducer test
• Frequency response and network analysis
• ATE