ADP1614

推荐新设计使用

650kHz /1.3 MHz、4 A、升压PWM DC-DC开关转换器

数据手册 (Rev. B) 产品选型表
产品模型
3
产品技术资料帮助

ADI公司所提供的资料均视为准确、可靠。但本公司不为用户在应用过程中侵犯任何专利权或第三方权利承担任何责任。技术指标的修改不再另行通知。本公司既没有含蓄的允许，也不允许借用ADI公司的专利或专利权的名义。本文出现的商标和注册商标所有权分别属于相应的公司。
Viewing:

产品详情

  • 可调和固定限流选项：
    最高可调电流：4A
    固定电流：3A
  • 输入电压范围：2.5 V至5.5V
  • 固定频率选项：650kHz或1.3MHz
  • 可调输出电压最高可达20V
  • 可调软启动
  • 欠压闭锁
  • 热关断
  • 3mm×3mm、10引脚LFCSP
  • ADIsimPower设计工具支持

ADP1614
650kHz /1.3 MHz、4 A、升压PWM DC-DC开关转换器
ADP1614 Functional Block Diagram ADP1614 Pin Configuration
添加至 myAnalog

将产品添加到myAnalog 的现有项目或新项目中（接收通知）。

创建新项目
提问

参考资料

数据手册 1

用户手册 1

应用笔记 1

技术文章 1

了解更多
添加至 myAnalog

将产品添加到myAnalog 的现有项目或新项目中（接收通知）。

创建新项目

工具及仿真模型

LTspice 1

LTspice中提供以下器件型号：

  • ADP1614
  • ADP1614-1.3
  • ADP1614-650

ADP161x SEPIC-Cuk Design Tool

Microsoft Excel download tool from ADIsimPower to generate a power supply design complete with a schematic, bill of materials, and performance specifications.

打开工具

ADP161x Coupled-SEPIC Design Tool

Microsoft Excel download tool from ADIsimPower to generate a power supply design complete with a schematic, bill of materials, and performance specifications.

打开工具

ADP161x Boost Regulator Design Tool

Microsoft Excel download tool from ADIsimPower to generate a power supply design complete with a schematic, bill of materials, and performance specifications.

打开工具
LTspice

LTspice®是一款强大高效的免费仿真软件、原理图采集和波形观测器，为改善模拟电路的仿真提供增强功能和模型。

评估套件

EVAL-ADP1614

ADP1614 Evaluation Board

立即购买 更多内容

特性和优点

  • 2.5 V to 5.5 V input voltage range
  • 650 kHz or 1.3 MHz fixed frequency options
  • Adjustable current limit up to 4 A
  • Output voltage
    5 V for ADP1614-650-EVALZ
    15 V for ADP1614-1.3-EVALZ
  • Jumper for enable/shutdown control
  • Components optimized for the indicated output voltages

产品详情

The ADP1614 evaluation board is a complete step-up, dc-to-dc switching converter application with components selected to allow operation over the full range of input and load conditions for the 5 V (ADP1614-650-EVALZ) and 15 V (ADP1614-1.3-EVALZ) output voltages. The boost switching frequency is fixed to either 650 kHz (ADP1614-650-EVALZ) or 1.3 MHz (ADP1614-1.3- EVALZ). The evaluation boards can be adjusted for different output voltages by changing the feedback resistors, R1 and R2. To ensure stable operation, external components L1, RCL, COUT, RCOMP, and CCOMP may also need to be recalculated and adjusted when the output voltage is changed.

The ADP1614 evaluation board operates in current mode, pulsewidth modulation (PWM) with up to 94% efficiency. The current mode PWM architecture allows for excellent transient response, easy noise filtering, and the use of small, cost-saving external inductors and capacitors. Other key features include a 47 nF soft start capacitor, undervoltage lockout (UVLO), thermal shutdown (TSD), and jumper selected enable. The evaluation board demonstrates the operation and performance of the ADP1614.

This user guide includes I/O descriptions, setup instructions, the schematic, and the PCB layout drawings for the ADP1614 step-up converter evaluation board.

Complete specifications for the ADP1614 are available in the ADP1614 data sheet and should be consulted in conjunction with this document when using the evaluation board.
EVAL-ADP1614
ADP1614 Evaluation Board

参考电路

CN-0393 Simplified Schematic Diagram
CN-0393 Simplified Schematic Diagram
Photograph of EVAL-CN0393-FMCZ Board
CN0393 参考设计

集成μModule数据采集系统的库隔离、2通道、16位、500 kSPS同步采样信号链

查看参考设计详情

特性和优点

  • 2通道、16位500kSPS同步采样
  • 库隔离
  • 完整的数据采集系统

使用部分

设计和集成工具

视频

  • lazy blur
    VIDEO · 2021-10-20
    减少精密转换设计周期中的挑战
  • lazy blur
    VIDEO · 2017-01-26 02:28
    Reducing Challenges in the Precision Conversion Design Cycle
CN0393
集成μModule数据采集系统的库隔离、2通道、16位、500 kSPS同步采样信号链
CN-0393 Simplified Schematic Diagram
Photograph of EVAL-CN0393-FMCZ Board

最新评论

5 年前
RE: ADP1614 不能带电子负载
查看EngineerZone®的相关讨论

近期浏览