LTM4601

量产

具 PLL、输出跟踪和裕度调节功能的 12A µModule 稳压器

数据手册产品选型表

产品模型: 10

Viewing:

产品详情

完整的开关模式电源
宽输入电压范围：4.5V 至 20V
12A DC (典型值)、14A 峰值输出电流
0.6V 至 5V 输出电压
输出电压跟踪和裕量调节
多个 µModule 稳压器以实现均流
采用差分远程检测以实现精准稳压 (仅 LTM4601)
PLL 频率同步
±1.5% 稳压
电流折返保护 (在启动时停用)
符合 SnPb 或 RoHS 标准的涂层
超快 (UltraFast^™) 速瞬态响应
电流模式控制
在 5V_IN、3.3V_OUT 时的效率高达 95%
可编程软起动
输出过压保护
小占板面积、扁平 (15mm x 15mm x 2.82mm) 表面贴装型 LGA 和 (15mm x 15mm x 3.42mm) BGA 封装

产品模型: 10

参考资料

ADI 始终高度重视提供符合最高质量和可靠性水平的产品。我们通过将质量和可靠性检查纳入产品和工艺设计的各个范围以及制造过程来实现这一目标。出货产品的“零缺陷”始终是我们的目标。查看我们的质量和可靠性计划和认证以了解更多信息。

产品型号	引脚/封装图-中文版	文档	CAD 符号，脚注和 3D模型
LTM4601EV#PBF	118-Lead LGA (15mm x 15mm x 2.82mm)	Material Declaration Reliablity Data	Ultra Librarian SamacSys
LTM4601EV-1#PBF	118-Lead LGA (15mm x 15mm x 2.82mm)	Material Declaration Reliablity Data	Ultra Librarian SamacSys
LTM4601EY#PBF	118-Lead BGA (15mm x 15mm x 3.42mm)	Material Declaration Reliablity Data	Ultra Librarian SamacSys
LTM4601EY-1#PBF	118-Lead BGA (15mm x 15mm x 3.42mm)	Material Declaration Reliablity Data	Ultra Librarian SamacSys
LTM4601IV#PBF	118-Lead LGA (15mm x 15mm x 2.82mm)	Material Declaration Reliablity Data	Ultra Librarian SamacSys
LTM4601IV-1#PBF	118-Lead LGA (15mm x 15mm x 2.82mm)	Material Declaration Reliablity Data	Ultra Librarian SamacSys
LTM4601IY	118-Lead BGA (15mm x 15mm x 3.42mm)	Material Declaration Reliablity Data	Ultra Librarian SamacSys
LTM4601IY#PBF	118-Lead BGA (15mm x 15mm x 3.42mm)	Material Declaration Reliablity Data	Ultra Librarian SamacSys
LTM4601IY-1	118-Lead BGA (15mm x 15mm x 3.42mm)	Material Declaration Reliablity Data	Ultra Librarian SamacSys
LTM4601IY-1#PBF	118-Lead BGA (15mm x 15mm x 3.42mm)	Material Declaration Reliablity Data	Ultra Librarian SamacSys

产品型号	产品生命周期	PCN

7月 21, 2021 - 21_0159 Ink Mark to Laser Mark Conversion for µModule
		PCN21_0159_Form Material_Report Delta Qualification Matrix
LTM4601EV#PBF	量产
LTM4601EV-1#PBF	量产
LTM4601EY#PBF	量产
LTM4601EY-1#PBF	量产
LTM4601IV#PBF	量产
LTM4601IV-1#PBF	量产
LTM4601IY	量产
LTM4601IY#PBF	量产
LTM4601IY-1	量产
LTM4601IY-1#PBF	量产
2月 28, 2020 - 20_0123 Micro-Module, Test Site Transfer from Analog Devices Singapore to Analog Devices Penang, Malaysia
		PCN20_0123_Form Material_Report Test Correlation Report Other Qualification Results Summary
LTM4601EV#PBF	量产
LTM4601EV-1#PBF	量产
LTM4601EY#PBF	量产
LTM4601EY-1#PBF	量产
LTM4601IV#PBF	量产
LTM4601IV-1#PBF	量产
LTM4601IY	量产
LTM4601IY#PBF	量产
LTM4601IY-1	量产
LTM4601IY-1#PBF	量产

这是最新版本的数据手册

软件资源

找不到您所需的软件或驱动?

申请驱动/软件

硬件生态系统

部分模型	产品周期	描述
µModule降压稳压器 1
LTM4620A	量产	双通道 13A 或单通道 26A DC/DC μModule 稳压器
高压热插拔控制器 1
LTC4364	推荐新设计使用	具理想二极管的浪涌抑制器
硅振荡器 1
LTC6908		具扩频调制功能、采用电阻器设定频率的 SOT-23 封装振荡器
数字电源系统管理器 1
LTC2974	推荐新设计使用	具有精确输出电流的4通道PMBus电源系统管理器

双电源监控器 1
LTC2960	推荐新设计使用	36V、纳安级电流、两输入电压监视器

部分模型	产品周期	描述
LTC2974	推荐新设计使用	具有精确输出电流的4通道PMBus电源系统管理器
LTC4364	推荐新设计使用	具理想二极管的浪涌抑制器
LTC2960	推荐新设计使用	36V、纳安级电流、两输入电压监视器

工具及仿真模型

LTspice 5

LTspice中提供以下器件型号：

LTM4601
LTM4601-1
LTM4601A
LTM4601A-1
LTM4601AHV
LTM4601HV

LTspice^®是一款强大高效的免费仿真软件、原理图采集和波形观测器，为改善模拟电路的仿真提供增强功能和模型。

评估套件

LTM4601EV Demo Board | LTM4601(x2), 5V ≤ VIN ≤ 20V, VOUT1 = 3.3V @ 10A, VOUT2 = 2.5V @ 12A

立即购买更多内容

产品详情

Demonstration circuit 1118A-A features two independent LTM4601EV high efficiency, high density switch mode step-down power modules. The input voltage range is from 5V to 20V. The output voltages are 3.3V and 2.5V; refer to step down ratio curve in the LTM4601 datasheet. The rated load currents are 10A for the 3.3V output and 12A for the 2.5V output, while derating is necessary for certain V_IN and thermal conditions. The output of U2 is set to coincidentally track with the 3.3V output. Margining function is provided for the user who wants to stress their system by varying supply voltages during testing. Integrated input and output filters enable a simple PCB layout. Only bulk input and output capacitors are needed.

资料

DC1118A-A - Schematic
2011/2/17

DC1118A-A - Design File
2011/2/17

DC1118A-A - Demo Manual
2011/2/17

LTM4601 Demo Board | 4.5V ≤ VIN ≤ 20V, VOUT = 0.6V to 5V @ 12A

立即购买更多内容

产品详情

Demonstration circuit DC1041A-A features the LTM4601EV, a 12A high efficiency, high density switch mode step-down converter. The input voltage range is from 4.5V to 20V. The output voltage is jumper selectable for popular voltages from 0.6V to 5V. The PLLIN pin supports synchronizing the μModule^® regulator to an external clock. The TRACK/SS pin allows the user to program output ramp-up and ramp-down rates which may coincidentally or ratiometrically track with another supply’s output if desired. Output voltage margining of ±5% from the nominal value is available via the margin control pins MARG0 and MARG1.

资料

DC1041A-A Demo Manual
2011/5/25

DC1041A - Schematic
2009/9/24

DC1041A - Design File
2009/9/24

LTM4601 Demo Board | LTM4601(×4), 5V ≤ VIN ≤ 20V, VOUT = 0.6V to 3.3V @ 40A

立即购买更多内容

产品详情

Demonstration circuit DC1043A-C features four LTM4601EV high efficiency, high density switch mode step-down power modules in parallel (the LTM4601-1 can be substituted for the slave devices). The input voltage range is from 5.0V to 20V. The output voltage is programmable from 0.6V to 3.3V; refer to step down ratio curve in the LTM4601 datasheet. The rated load current is 40A, while de-rating is necessary for certain V_IN, V_OUT, and thermal conditions. Master module U1 provides differential remote sensing to accurately regulate output voltage independent of load current. Integrated input and output filters enable a simple PCB layout. Only bulk input and output capacitors are needed externally.

资料

DC1043A - Design File
2009/9/24

DC1043A - Schematic
2009/9/24

DC1043A - Demo Manual
2009/9/24

LTM4601EV Demo Board | LTM4601(x4), 5V ≤ VIN ≤ 20V, VOUT1 = 3.3V @ 10A, VOUT2 = 2.5V @ 12A, VOUT3 = 1.8V @ 12A, VOUT4 = 1.5V @ 12A

立即购买更多内容

产品详情

Demonstration circuit 1118A-C features four independent LTM4601EV high efficiency, high density switch mode step-down power modules. The input voltage range is from 5V to 20V. The output voltages are 3.3V, 2.5V,1.8V and 1.5V; refer to step down ratio curve in the LTM4601 datasheet. The rated load currents are 10A for the 3.3V output, and 12A for the 2.5V, 1.8V and 1.5V outputs, while derating is necessary for certain VIN and thermal conditions. The output of U2 is set to coincidentally track with the 3.3V output. Margining function is provided for the user who wants to stress their system by varying supply voltages during testing. Integrated input and output filters enable a simple PCB layout; only bulk input and output capacitors are needed.

资料

DC1118A-C - Schematic
2011/2/17

DC1118A-C - Demo Manual
2011/2/17

DC1118A-C - Design File
2011/2/17

LTM4601EV Demo Board | LTM4601(x3), 5V ≤ VIN ≤ 20V, VOUT1 = 3.3V @ 10A, VOUT2 = 2.5V @ 12A, VOUT3 = 1.8V @ 12A

立即购买更多内容

产品详情

Demonstration circuit 1118A-B features three independent LTM4601EV high efficiency, high density switch mode step-down power modules. The input voltage range is from 5V to 20V. The output voltages are 3.3V, 2.5V and 1.8V; refer to step down ratio curve in the LTM4601 datasheet. The rated load currents are 10A for the 3.3V output, 12A for the 2.5V output and 12A for the 1.8V output, while derating is necessary for certain V_IN and thermal conditions. The output of U2 is set to coincidentally track with the 3.3V output. Margining function is provided for the user who wants to stress their system by varying supply voltages during testing. Integrated input and output filters enable a simple PCB layout; only bulk input and output capacitors are needed.

资料

DC1118A-B - Design File
2011/2/17

DC1118A-B - Demo Manual
2011/2/17

DC1118A-B - Schematic
2011/2/17

LTM4601 Demo Board | LTM4601(×3), 5V ≤ VIN ≤ 20V, VOUT = 0.6V to 3.3V @ 30A

立即购买更多内容

产品详情

Demonstration circuit DC1043A-B features three LTM4601EV high efficiency, high density switch mode step-down power modules in parallel (the LTM4601-1 can be substituted for the slave devices). The input voltage range is from 5.0V to 20V. The output voltage is programmable from 0.6V to 3.3V; refer to step down ratio curve in the LTM4601 datasheet. The rated load current is 30A, while de-rating is necessary for certain V_IN, V_OUT, and thermal conditions. Master module U1 provides differential remote sensing to accurately regulate output voltage independent of load current. Integrated input and output filters enable a simple PCB layout. Only bulk input and output capacitors are needed externally.

资料

DC1043A - Design File
2009/9/24

DC1043A - Schematic
2009/9/24

DC1043A - Demo Manual
2009/9/24

LTM4601 Demo Board | LTM4601(×2), 5V ≤ VIN ≤ 20V, VOUT = 0.6V to 3.3V @ 20A

立即购买更多内容

产品详情

Demonstration circuit DC1043A-A features the LTM4601EV and LTM4601-1EV, the high efficiency, high density switch mode step-down power modules. The input voltage range is from 5.0V to 20V. The output voltage is programmable from 0.6V to 3.3V; refer to step down ratio curve in the LTM4601 datasheet. The rated load current is 20A, while de-rating is necessary for certain V_IN, V_OUT, and thermal conditions. 24A load current can be achieved by applying forced airflow convection or attaching heatsinks. Master module U1 provides differential remote sensing to accurately regulate output voltage independent of load current. Integrated input and output filters enable a simple PCB layout. Only bulk input and output capacitors are needed externally. The DC1043A-A has on-board 180 degree interleaving clock generator.

资料

DC1043A - Design File
2009/9/24

DC1043A - Schematic
2009/9/24

DC1043A - Demo Manual
2009/9/24

参考电路

查看参考设计详情

特性和优点

Analog Devices has worked closely with FPGA and processor manufacturers to develop verified power solutions that optimize cost, size and efficiency in high performance applications
Our reference designs are supported by an intuitive design tool set and IP
Our team can provide designs for quick prototypes that can speed time to market in the most complex applications

使用部分

查看参考设计详情

特性和优点

Analog Devices has worked closely with FPGA and processor manufacturers to develop verified power solutions that optimize cost, size and efficiency in high performance applications
Our reference designs are supported by an intuitive design tool set and IP
Our team can provide designs for quick prototypes that can speed time to market in the most complex applications

使用部分

查看参考设计详情

特性和优点

Analog Devices has worked closely with FPGA and processor manufacturers to develop verified power solutions that optimize cost, size and efficiency in high performance applications
Our reference designs are supported by an intuitive design tool set and IP
Our team can provide designs for quick prototypes that can speed time to market in the most complex applications

使用部分

LTC3025-1
LTC3025-2
LTC3025-3
LTC3025-4

LT3980

LT3080

LT3029

查看参考设计详情

特性和优点

Analog Devices has worked closely with FPGA and processor manufacturers to develop verified power solutions that optimize cost, size and efficiency in high performance applications
Our reference designs are supported by an intuitive design tool set and IP
Our team can provide designs for quick prototypes that can speed time to market in the most complex applications

使用部分

LTC3025-1
LTC3025-2
LTC3025-3
LTC3025-4

查看参考设计详情

特性和优点

Analog Devices has worked closely with FPGA and processor manufacturers to develop verified power solutions that optimize cost, size and efficiency in high performance applications
Our reference designs are supported by an intuitive design tool set and IP
Our team can provide designs for quick prototypes that can speed time to market in the most complex applications

使用部分

查看参考设计详情

特性和优点

Analog Devices has worked closely with FPGA and processor manufacturers to develop verified power solutions that optimize cost, size and efficiency in high performance applications
Our reference designs are supported by an intuitive design tool set and IP
Our team can provide designs for quick prototypes that can speed time to market in the most complex applications

使用部分

查看参考设计详情

特性和优点

Analog Devices has worked closely with FPGA and processor manufacturers to develop verified power solutions that optimize cost, size and efficiency in high performance applications
Our reference designs are supported by an intuitive design tool set and IP
Our team can provide designs for quick prototypes that can speed time to market in the most complex applications

使用部分

查看参考设计详情

特性和优点

Analog Devices has worked closely with FPGA and processor manufacturers to develop verified power solutions that optimize cost, size and efficiency in high performance applications
Our reference designs are supported by an intuitive design tool set and IP
Our team can provide designs for quick prototypes that can speed time to market in the most complex applications

使用部分

查看参考设计详情

特性和优点

Analog Devices has worked closely with FPGA and processor manufacturers to develop verified power solutions that optimize cost, size and efficiency in high performance applications
Our reference designs are supported by an intuitive design tool set and IP
Our team can provide designs for quick prototypes that can speed time to market in the most complex applications

使用部分

LTC3025-1
LTC3025-2
LTC3025-3
LTC3025-4

查看参考设计详情

特性和优点

Analog Devices has worked closely with FPGA and processor manufacturers to develop verified power solutions that optimize cost, size and efficiency in high performance applications
Our reference designs are supported by an intuitive design tool set and IP
Our team can provide designs for quick prototypes that can speed time to market in the most complex applications

使用部分

查看参考设计详情

特性和优点

Analog Devices has worked closely with FPGA and processor manufacturers to develop verified power solutions that optimize cost, size and efficiency in high performance applications
Our reference designs are supported by an intuitive design tool set and IP
Our team can provide designs for quick prototypes that can speed time to market in the most complex applications

使用部分

LT3080-1

LTC3025-1
LTC3025-2
LTC3025-3
LTC3025-4

查看参考设计详情

特性和优点

Analog Devices has worked closely with FPGA and processor manufacturers to develop verified power solutions that optimize cost, size and efficiency in high performance applications
Our reference designs are supported by an intuitive design tool set and IP
Our team can provide designs for quick prototypes that can speed time to market in the most complex applications

使用部分

查看参考设计详情

特性和优点

Analog Devices has worked closely with FPGA and processor manufacturers to develop verified power solutions that optimize cost, size and efficiency in high performance applications
Our reference designs are supported by an intuitive design tool set and IP
Our team can provide designs for quick prototypes that can speed time to market in the most complex applications

使用部分

LTM4628

LT3080-1

LTC3025-1
LTC3025-2
LTC3025-3
LTC3025-4

LT1963

LTM4601

LT1117

查看参考设计详情

特性和优点

Analog Devices has worked closely with FPGA and processor manufacturers to develop verified power solutions that optimize cost, size and efficiency in high performance applications
Our reference designs are supported by an intuitive design tool set and IP
Our team can provide designs for quick prototypes that can speed time to market in the most complex applications