LT3579

推荐新设计使用

具故障保护功能的 6A、升压 / 负输出 DC/DC 转换器

产品模型
16
产品技术资料帮助

ADI公司所提供的资料均视为准确、可靠。但本公司不为用户在应用过程中侵犯任何专利权或第三方权利承担任何责任。技术指标的修改不再另行通知。本公司既没有含蓄的允许,也不允许借用ADI公司的专利或专利权的名义。本文出现的商标和注册商标所有权分别属于相应的公司。

Viewing:

产品详情

  • 6A、42V 组合式电源开关
  • 输出短路保护
  • 宽输入范围:工作时为 2.5V 至 16V,最大瞬态电压为 40V
  • LT3579-1:可执行双相操作
  • 主 / 从 (3.4A / 2.6A) 开关设计
  • 可由用户进行配置的欠压闭锁
  • 可以容易地配置成一个升压、SEPIC、负输出或反激式转换器
  • 低 VCESAT 开关:在 5.5A 时为 250mV (典型值)
  • 可同步至外部时钟
  • 可对其他开关稳压器进行同步处理
  • 高增益 SHDN 引脚可接受缓慢变化的输入信号
  • 20 引脚 TSSOP 封装和 20 引脚 4mm x 5mm QFN 封装

LT3579
具故障保护功能的 6A、升压 / 负输出 DC/DC 转换器
添加至 myAnalog

将产品添加到myAnalog 的现有项目或新项目中(接收通知)。

创建新项目
提问

参考资料

了解更多
添加至 myAnalog

将产品添加到myAnalog 的现有项目或新项目中(接收通知)。

创建新项目

工具及仿真模型

LTspice

LTspice®是一款强大高效的免费仿真软件、原理图采集和波形观测器,为改善模拟电路的仿真提供增强功能和模型。


评估套件

eval board
DC1661A

LT3579EFE/LT3579EFE-1 Demo Board | 2 Paralleled LT3579's, 5V ≤ VIN ≤ 10V, VOUT = 12V @ 3.5A

产品详情

Demonstration circuit 1661A features the LT3579 and LT3579-1 in a parallel boost regulator configuration. The circuit is designed to convert a 5V to 10V input source to 12V at 3.5A. DC1661A is designed to survive output short circuit events with an external disconnect MOSFET at the output as default.

eval board
DC1514A

LT3579EFE Demo Board | 5V ≤ VIN ≤ 10V, VOUT = 12V @ 1.75A, Fault Protection

产品详情

Demonstration circuit 1514A feature the LT3579 in A Boost Regulator configuration. The Boost is designed to convert a 5V to 10V input source to 12V at 1.75A. DC1514A is designed to survive output short circuit events with the external MOSFET installed at the input as default. The board includes an option to install the MOSFET at the output side. The LT3579 includes a 42V Master and Slave switch combination with 6A total current and can be used in many configurations such as Boost, SEPIC, Cuk and Flyback.

DC1661A
LT3579EFE/LT3579EFE-1 Demo Board | 2 Paralleled LT3579's, 5V ≤ VIN ≤ 10V, VOUT = 12V @ 3.5A
DC1661A - Schematic
DC1514A
LT3579EFE Demo Board | 5V ≤ VIN ≤ 10V, VOUT = 12V @ 1.75A, Fault Protection
DC1514A - Schematic

最新评论

近期浏览