ADN2917

NOT RECOMMENDED FOR NEW DESIGNS

Continuous Rate 8.5 Gbps to 11.3 Gbps Clock and Data Recovery IC with Integrated Limiting Amp/EQ

Data Sheet (Rev. C) Product Selection Table

Part Models: 2
1ku List Price: price unavailable

Viewing:

Part Details

Serial data input: 8.5 Gbps to 11.3 Gbps
No reference clock required
Exceeds SONET/SDH requirements for jitter transfer/generation/tolerance
Quantizer sensitivity: 9.2 mV p-p typical (limiting amplifier mode)
Optional limiting amplifier and equalizer inputs
Programmable jitter transfer bandwidth to support G.8251 OTN
Programmable slice level
Sample phase adjust
Output polarity invert
Programmable LOS threshold via I²C
I²C to access optional features
LOS alarm (limiting amplifier mode only)
LOL indicator
PRBS generator/detector
Application-aware power
- 352 mW at 8.5 Gbps, equalizer mode, no clock output
- 430 mW at 11.3 Gbps, equalizer mode, no clock output
Power supplies: 1.2 V, flexible 1.8 V to 3.3 V, and 3.3 V
4 mm × 4 mm 24-lead LFCSP

Part Models: 2
1ku List Price: price unavailable

Documentation

Data Sheet 1

ADN2917: Continuous Rate 8.5 Gbps to 11.3 Gbps Clock and Data Recovery IC with Integrated Limiting Amp/EQ Data Sheet (Rev.C) 05/13/2014

User Guide 1

UG-877: ADN2905/ADN2913/ADN2915/ADN2917 Evaluation Board Setup and Applications 09/15/2015

ADI has always placed the highest emphasis on delivering products that meet the maximum levels of quality and reliability. We achieve this by incorporating quality and reliability checks in every scope of product and process design, and in the manufacturing process as well. "Zero defects" for shipped products is always our goal. View our quality and reliability program and certifications for more information.

Part Model	Pin/Package Drawing	Documentation	CAD Symbols, Footprints, and 3D Models
ADN2917ACPZ	24-Lead LFCSP (4mm x 4mm w/ EP)	Material Declaration Reliablity Data	Ultra Librarian SamacSys
ADN2917ACPZ-RL7	24-Lead LFCSP (4mm x 4mm w/ EP)	Material Declaration Reliablity Data	Ultra Librarian SamacSys

Part Models	Product Lifecycle	PCN

May 21, 2021 - 21_0075 Discontinuance of ADN2917
		PDN21_0075_Form Material_Report
ADN2917ACPZ	Obsolete
ADN2917ACPZ-RL7	Obsolete

This is the most up-to-date revision of the Data Sheet.

Evaluation Kits

ADN2905/ADN2913/ADN2915/ADN2917 Evaluation Board

Buy Now View Details

Features and Benefits

Full featured evaluation board for the ADN2905/ADN2913/ADN2915/ADN2917
Configurable as PRBS generator or PRBS error detector
Locked to any rate, continuous mode, up to 11.3 Gbps input signal

Product Details

The ADN2905, ADN2913, ADN2915, and ADN2917 provide the receiver functions of quantization, signal level detect, and clock/data recovery for a continuous signal data rate range from 6.5 Mbps to 11.3 Gbps. The ADN29xx automatically lock to such a data signal without referring to an external clock or extra programming. All SONET/SDH jitter requirements are exceeded, including jitter transfer, jitter generation, and jitter tolerance. All specifications are quoted for the –40°C to +85°C temperature range, unless otherwise noted.

For the best input signal detection, the ADN29xx input circuitry can be configured as a limiting amplifier, an equalizer, or a 0 dB equalizer. Additionally, the ADN29xx provide manual control of sampling phase and slice level adjust to optimize the incoming data eye detection.

The loss of signal (LOS) is available in limiting amplifier input mode only. The asserted LOS indicates that the input signal level has fallen below a preset threshold. The LOS detect circuit provides a typical 6.0 dB hysteresis to prevent LOS output chatter.

The asserted loss of lock (LOL) indicates when incoming signal rate shifts more than 1000 ppm away from the CDR VCO frequency.

The ADN29xx are available in a compact 4 mm × 4 mm, 24-lead chip scale package (LFCSP).

Full specifications on the ADN2905/ADN2913/ADN2915/ADN2917 are available in the product data sheet, which should be consulted in conjunction with this user guide when working with the evaluation board.

The ADN2905, ADN2913, ADN2915, and ADN2917 are pin-to-pin compatible devices and share the same evaluation board. Each EVALZ-ADN29xx evaluation board is populated by a different DUT: ADN2905 on the EVALZ-ADN2905, ADN2913 on the EVALZ-ADN2913, ADN2915 on the EVALZ-ADN2915, and ADN2917 on the EVALZ-ADN2917.