ADG1236

• Ultra-low distortion, high-resolution source
  • DC, 50Hz to 40kHz Frequency Range
  • Proprietary digital pre-distortion (DPD) algorithm
  • –130dBc THD @ 1kHz (typ.)
  • Arbitrary waveform generation (AWG) with on-board pattern memory
  • Differential (balanced) output up to 3.6VRMS
• Fast pattern switching between multiple stored waveforms
• Small form-factor (60mm x 40mm)
• Low power, 1W typ. (quiescent)
• SPI interface for integration into test and measurement systems

The ADMX1002 is an ultra-low distortion sinewave and high-resolution arbitrary waveform generator. This high-performance module demonstrates a proprietary digital pre-distortion algorithm that reduces signal distortion below levels that can be achieved with high-performance digital-to-analog converters (DAC) and amplifiers alone. Its differential output can be set to common-mode levels often required to test high-performance analog-to-digital converters (ADC), audio codecs, and other audio ICs and systems. With an easy-to-use SPI interface and small-form factor, the ADMX1002 can be easily embedded into test systems, or simply used on the bench for measurement and characterization.

APPLICATIONS

• High-end audio test
• Analog-to-digital converter characterization and test
• Sensor and transducer test
• Frequency response and network analysis
• ATE

• 16 lead TSSOP evaluation board
• Clamp to allow the main device to be changed easily
• Gold pin connectors to allow the addition of passive components
• SMB connectors for the input/output of signals
• Additional space on board to allow for prototyping

The EVAL-16TSSOPEBZ evaluation board evaluates 16-lead TSSOP devices in the Switches and Multiplexers Portfolio that are purchased separately. A clamp is supplied with the EVAL-16TSSOPEBZ to secure a 16-lead TSSOP device to the evaluation board without the need for soldering, making the board reusable for multiple devices.

A 16-lead TSSOP device can be clamped or soldered to the center of the evaluation board. Each pin of the device has a corresponding link from K1 to K16 that can be set to either VDD or GND. A wire screw terminal supplies VDD and GND. SMB connectors on the board allow additional external signals to be supplied to the device. In addition, there is space available at the top of the board for prototyping.

Full specifications of the device under test (DUT) are available in the corresponding product data sheet, which should be consulted in conjunction with this user guide when using the evaluation board.

• Ultra-low distortion, high-resolution source
  • DC, 50Hz to 40kHz Frequency Range
  • Proprietary digital pre-distortion (DPD) algorithm
  • –130dBc THD @ 1kHz (typ.)
  • Arbitrary waveform generation (AWG) with on-board pattern memory
  • Differential (balanced) output up to 3.5VRMS
  • Fast pattern switching between multiple stored waveforms
• Fully Differential input Acquisition Channel
• Small form-factor (60mm x 40mm)
• Low power, 1W typ. (quiescent)
• SPI interface for integration into test and measurement systems

The ADMX1001 is an ultra-low distortion sinewave and high-resolution arbitrary waveform generator with an acquisition channel. This high-performance module demonstrates a proprietary digital pre-distortion algorithm that reduces signal distortion below levels that can be achieved with high-performance digital-to-analog converters (DAC) and amplifiers alone. Its differential output can be set to common-mode levels often required to test high-performance analog-to-digital converters (ADC), audio codecs, and other audio ICs and systems. The signal generator and the acquisition channel can be individually controlled using separate, easy to use, SPI interfaces - combined with the module's small-form factor, the ADMX1001 can be easily embedded into test systems, or simply used on the bench for measurement and characterization.

APPLICATIONS

• High-end audio test
• Analog-to-digital converter characterization and test
• Sensor and transducer test
• Frequency response and network analysis
• ATE